How to Clean Water Softener Resin?

To improve the efficiency of water softener it is important to know how to clean water softener resin? You can get the best out of your unit if you properly clean and regenerate the system. Resin is an integral part of water softener because it works to soften the hard water. So, to fix all issues created by hard water it is necessary to clean water softener resin. We in this guide how to clean water softener resin will discuss all the steps of cleaning the water softener resin bed. Hopefully you will find it the best.

How to clean water Softener Resin

Step by Step Guide on How to Clean Water Softener Resin?

Before probing into details it seems appropriate to know what is water softener?

What is Water Softener?

The people living in hard water areas face the problem of hard water. The water with hard minerals has created a lot of problems on domestic and professional level. Water softener is the essential appliance of the homes with hard water. It softeners the water and make it bets to use for drinking, cooking, bathing and for all other purposes.

Water is softened through a process called ion exchange. As the hard water is full of magnesium, calcium, iron and many other elements.  When this hard water passes through the resin beads inside the system the hard minerals replace them with the sodium. Then the pure water enters in the tap of bathrooms and kitchens. The system makes the water pure to use and supply clean water to your home. But, the whole system needs regeneration once in a week, otherwise the buildup will affect reduce the efficiency of system.

How to Clean Water Softener Resin?

The water softener system consists of two tanks. One of these tanks (resin tank) holds the resin beads and the other one (brine tank) contains the salt pellets. During softening the water process, both these perform their role. Knowing how to clean water softener resin is important because it is mostly responsible for softening the hard water. So it must be perfect for performing its duty in the best possible manner. If you are unfamiliar with the process of how to clean the water softener resin, then stay here. Would you please not go anywhere because we will present a simple solution to the problem?

Moreover, the resin tank contains the resin beads to clean the water. These resin beads are negatively charged. As the water passes through these beads, the hard minerals stick to them, and water gets clean. Your system needs regeneration to purge the water. The resin beads get clean during the regeneration process. For more cleanliness, you can purchase a resin beads cleaner from the market. The market is overwhelmed with a great variety of beads cleaner. To get the best using cleaner you must see the instructions and how much quantity to use.

Additionally, some cleaners have the potential to fight with specific minerals, like iron and magnesium. They affect the targeted mineral effectively. So, it would help if you judged first the element in large quantity in your home water. After that, you can purchase the specific resin cleaner to purge your water.

To get rid of these minerals, use resin cleaner products. Pour the recommended amount of resin cleaner into the tank. This resin cleaner contains negatively charged ions. As the magnesium, calcium, and iron (hard water element)pass through them, they stick with resin beads. Furthermore, using these resin cleaners, the collection of hard minerals gets to stick with the salt.

How to Clean the Brine Tank?

The second most important part of the water softener system for cleaning hard water is the brine tank. As mentioned, that resin tank contains the resin beads, and the brine tank contains the salt pellets inside it. The use of salt pellets in the brine tank cause buildup in the tank. It happens when the salt pellets break down, and they cause clogging. As the problem persists, it gets essential to remove them. When you feel the problem, you need to fix it by taking a hammer or shovel. It would help if you struck hard to get rid of the problem.

Remove the Salt bridges.

Another problem that can affect your brine tank performance is the forming of salt bridges. Usually, this problem occurs with the newer systems. If you find them salt-forming, you frequently need to scrub them using a shovel. If it is soft, you can use the broomstick even to make it clean. To fix this issue, you must make a habit of analysis. Analyze the things and set them right before time. Especially the things that are more important for the health of you and your family.

What to do when There is Mold Inside?

In addition to this, there can be mold in the bottom of the brine tank. It would help if you cleaned it at once. For this, you must empty the brine tank for scrubbing in a better way. You must follow the manufacturer’s instructions and apply the recommended methods to get rid of the problem. If the quantity is high, you must bleach through the whole system. Bleach will enable you to scrub all the mold easily.

Important note;

Before using bleach, see for the manual whether it is recommended for your system or not. Keep in mind that don’t use the water coming from your taps when there is bleach inside. Use the water when the regeneration cycle is over.

Frequently Asked Questions About Clean Water Softener Resin

Can I put vinegar in my water softener?

The simple answer is yes; you can use it. Vinegar in water oftener system works on the same grounds as bleach. Take almost half a cup of vinegar and pour it into your system. Leave the unit for 15-20 minutes. After 20 minutes, scrub the unit to clean it. During the process, be careful don’t use tap water.

How to clean the inside of the water cleaner?

The manufacturing of the water softener system is user-friendly. So, the process of cleaning the inside is not difficult at all.  You can open the system to scrub it. Clean it nicely to make it free from unwanted elements. The resin tank containing the resin beads is also easy. It is sealed because it is assumed that it will serve as long as the system itself. Besides, you can apply the resin cleaner to clean the resin beads.

How do I know if my water softener resin is bad?

It is simple to know. You must analyze the quantity of salt.  If the system is taking salt as it is and you have no soft water, it means the resin beads have been saturated with iron or other unwanted minerals and are not regenerated by brine.

How often should I change the resin in a water softener?

You need to replace it after ten years. Resin that tackles the high level of hard minerals will last only for five years. TH hardness of your home’s water determines the life of the resin.

How often should you clean the brine tank?

It would help if you cleaned the tank once a week. It will give you better results, improving the performance of the unit. Cleaning the unit frequently will save your system from mold as well.

What is a brine well in a water softener?

The brine well of the water softener has salt pellets. A water softener uses these pellets to soften the hard minerals from the hard water.

Editor’s Note

Finally, the whole discussion of how to clean the water softener resin tank proves that cleaning the system is not a difficult task. You can do it nicely. You can find out what is the problem and how to tackle it? You can easily approach the brine tank to break the salt-forming. It is also easy to regenerate your system through bleach to get rid of undesired mold.

To add this, all the methods described in the system are pretty easy. The amazing point is it does not demand any extra expenses from your pocket except the resin cleaner and bleach etc. Moreover, to clean the resin beads in the resin tank, you need to apply the recommended resin cleaner from the manufacturer for exceptional results.

Leave a Comment